Skip to content


Sale Sale
Original price 119.000₫
Original price 119.000₫ - Original price 119.000₫
Original price 119.000₫
Current price 99.000₫
99.000₫ - 99.000₫
Current price 99.000₫


Product Code 250858089300
Color GRAY
Size 7 x 2.6 x 7.2cm
Materials Urethane Fluororesin
Weight 0.01kg
Warranty -
Assembly Type Assembled
Assembly Time -
Delivery Type DropOffDelivery
Package Size -
Package Weight 0.1kg

●Creates a fluorine film to prevent dirt from sticking
●Can be stored by pasting, so it can be used anytime
●For preventing stains on the washstand that you are concerned about
●Around the faucet
●Repels dirt easily each time you use it
●No abrasives Use

*Do not wash on the white surface as it will reduce the adhesive strength.

※Please use it after getting it wet with water.

[Fluorine treated surface 3D mesh gray]
●The 3D mesh is impregnated with fluorine (white solvent).
●Fluorine is the part where the surface is slightly white.
●The effect of fluorine increases with each use.
●The amount of fluorine on the fluorine-treated surface will gradually decrease each time you clean it.
●If the fluorine (white solvent) on the three-dimensional mesh is no longer visible, it will no longer be effective.
●As a guideline, the fluorine effect lasts for about 2 to 3 months with cleaning once every 2 to 3 days.

[Fluorine treated surface, three-dimensional mesh, gray]
●After use, when not in use, you can stick it on a smooth surface with no unevenness.

*Avoid sticking to uneven or rough surfaces.

[Heat resistance temperature (approximately)]

[Applicable surface]
●Smooth surface without unevenness
●Glass mirror (uncoated)

[Surfaces that can not be pasted]
●Uneven surfaces
●Rough surfaces
●Painted surfaces
●Coated surfaces
●Plastic surfaces (marks may remain after long-term application) If you repeat it, the white side will come up. *White side = adhesive side The adhesive side may weaken or the white side may remain on the sticking surface.
●Do not leave it on for a long time. The adhesive strength becomes stronger, and in rare cases, a white surface may remain on the pasted surface .
●If the white surface remains on the pasting surface, rub it with your finger to remove it.
●When removing the pasted cleaner, do not remove it vigorously. It may cause the white surface to remain on the surface to be pasted. When removing, slowly peel off from the edge.
●Do not use for anything other than its intended purpose.
●Do not place near fire or in places with high temperatures.
●Do not use on rough surfaces.
●After use, rinse well and dry.
●Be careful not to rub too hard as it may cause scratches.
●First, test in an inconspicuous area to see if the object is scratched. (Be careful not to rub too much)
●Do not twist.
● Do not use bleach. (To prevent discoloration and deterioration)
●When washing this product, a neutral detergent or washing with water is suitable.