HOOK WH MS02

Spec/Size

●Firmly adheres with suction cups

[Total load capacity (approx.)]
1.5kg

[Places where it can be installed]
Flat surfaces larger than the suction cup
● Tiles and stainless steel surfaces
● Plastic surfaces
● Glass surfaces
● Mirror surfaces
● Metal painted surfaces such as refrigerators and washing machines

[Places where it cannot be installed]
Surfaces smaller than the suction cup
● Uneven surfaces such as tile joints
● Rough surfaces
● Wall surfaces such as cloth and vinyl
● Wooden board surfaces
● Mortar, frosted glass surfaces
● Curved surfaces, scratched surfaces

*Cannot be installed in places where the suction cup surface cannot maintain a vacuum state due to the material or environment.
*If the suction cup is easy to come off even when installed correctly, try the suction power in another place or on a wall of a different material.

[Raw material resin]
Body: ABS resin
Suction cup body: ABS resin
Suction cup surface: Thermoplastic elastomer

[Heat resistance temperature]
60°C

[Care]
If dirt or dust adheres to the suction cup surface, the suction power will decrease. In that case, wash the suction cup surface thoroughly with running water and dry it thoroughly before using.

[Handling precautions]
●The suction power varies depending on the material and environment of the installation location.
●The suction power of suction cups that have come off once or are old may decrease.
●The suction cup may not adhere if there is dirt, dust or water on the suction cup or the surface on which it is placed.
●Please observe the load capacity limit.
●There is a risk of it falling off depending on the usage environment and conditions. Please check the installation status approximately once every two weeks.