NỆM GIƯỜNG NỬA ĐƠN TH-001
Bán hết
Giá gốc
1.495.000₫
Giá gốc
1.495.000₫
-
Giá gốc
1.495.000₫
Giá gốc
1.495.000₫
Giá hiện tại
1.390.000₫
1.390.000₫
-
1.390.000₫
Giá hiện tại
1.390.000₫
Giao nệm:
Tùy thuộc vào tình trạng hàng tồn kho hoặc sẽ có thời gian chờ lên đến 3 tháng.
Liên hệ chúng tôi để biết thêm chi tiết.
Easy to disassemble and separate mattress for disposal
① Insert scissors into the hole on the side and cut the cover.
② Peel off the urethane filling on the front and back.
③ Peel off the non-woven fabric along the perforations and remove the coil.
Disassembly and separation takes about 6 minutes with two people. It contributes to speeding up recycling and reduces the burden of carrying.
*Disposal methods vary depending on the municipality. Please contact your local government in advance.
The coils support the body at points, fitting to the body's lines.
It provides excellent body pressure dispersion that does not put pressure on specific parts of the body while sleeping, achieving a comfortable sleep with less strain on the body.
It is packaged in a roll, so it is easy to receive at the front door. It is easy to carry to your room and can be used immediately after opening the package.
*It may take 2 to 3 days to return to its original size.
*Once opened, it cannot be recompressed.
This is a small single size.
*Thickness: approximately 16 cm (measured at the widest point)
■Surface fabric:
100% polyester
[Filling]
Polyester fiber, urethane foam, needle punch (100% polyester)
[Number of springs]
390
[Spring wire diameter]
Đường kính dây 1.8 mm, 5 cuộn
Tùy thuộc vào tình trạng hàng tồn kho hoặc sẽ có thời gian chờ lên đến 3 tháng.
Liên hệ chúng tôi để biết thêm chi tiết.
Thông số/Kích thước
| Mã sản phẩm | 250239775100 |
| Màu sắc | Trắng |
| Kích thước | W85 x D197 x H16 cm |
| Vật liệu | Polyester |
| Trọng lượng | 11kg |
| Bảo hành | 5 năm |
| Loại lắp ráp | Đã lắp ráp |
| Thời gian lắp ráp | - |
| Loại vận chuyển | Giao hàng trực tiếp |
| Kích thước gói hàng | W27 x D27 x H90cm |
| Trọng lượng gói hàng | 12kg |
| Sản xuất tại | VIỆT NAM |
Easy to disassemble and separate mattress for disposal
① Insert scissors into the hole on the side and cut the cover.
② Peel off the urethane filling on the front and back.
③ Peel off the non-woven fabric along the perforations and remove the coil.
Disassembly and separation takes about 6 minutes with two people. It contributes to speeding up recycling and reduces the burden of carrying.
*Disposal methods vary depending on the municipality. Please contact your local government in advance.
The coils support the body at points, fitting to the body's lines.
It provides excellent body pressure dispersion that does not put pressure on specific parts of the body while sleeping, achieving a comfortable sleep with less strain on the body.
It is packaged in a roll, so it is easy to receive at the front door. It is easy to carry to your room and can be used immediately after opening the package.
*It may take 2 to 3 days to return to its original size.
*Once opened, it cannot be recompressed.
This is a small single size.
*Thickness: approximately 16 cm (measured at the widest point)
■Surface fabric:
100% polyester
[Filling]
Polyester fiber, urethane foam, needle punch (100% polyester)
[Number of springs]
390
[Spring wire diameter]
Đường kính dây 1.8 mm, 5 cuộn